How do you know if your tile floors actually need a deep clean? They may look pretty good from five or six feet up where your eyes are Amani Hooker Jersey Sale , but in fact they could need a deep clean. The best way to tell is with a wipe test. Take a clean kitchen towel and just wipe it over the floor and see what comes up. Another method is to put on a pair of white socks and walk across the floor. Either way, you will soon know if it needs a deep clean.
You may even have just damp mopped your tile floor and you obviously believe it is clean, but is it? Another way of testing is the touch test. This is really simple, because all you do is to run your hand over the floor. Does it feel sticky? If it does, it is not clean. The sticky residue is usually caused by the harsh detergents that are used Nate Davis Jersey Sale , and they often don't rinse clean from the floor. That sticky residue will simply glue more dirt to the floor.
Another test is to look at the floor. If the tile is supposed to be shiny, does it look shiny? Looking at any crevices in the floor surface and the grout can you see any dirt? Ask yourself this question: having mopped it, is it clean enough to eat your dinner off? If it isn't, then it's time to deep clean tiled floors.
Before you start, and on the assumption that your tiles are porcelain or ceramic A.J. Brown Jersey Sale , which is usually the case, you need to know what sort of dirt you are trying to clean. If it is your kitchen floor, then the most likely answer is grease and grime. In this case you need a cleaner that will cut grease. However, if it is in the bathroom and shower, then then it is probably soap scum. In this case you need a cleaner that will remove soap scum and a hard brush that is good for removing it. A soft cotton mop may be good enough for smooth tiled floors Jeffery Simmons Jersey Sale , but rough textured surfaces will need the brush.
Sweeping works well for many floors, but vacuuming is a better choice, even for tile floors. Most vacuum cleaners have a hard floor setting, but if not, raise the height setting to the maximum in ord